Menu
Your Cart

10W6v3-D4, W6 Series 10

10W6v3-D4, W6 Series 10
10W6v3-D4, W6 Series 10
10W6v3-D4, W6 Series 10
10W6v3-D4, W6 Series 10
10W6v3-D4, W6 Series 10
10W6v3-D4, W6 Series 10
10W6v3-D4, W6 Series 10
10W6v3-D4, W6 Series 10
10W6v3-D4, W6 Series 10
10W6v3-D4, W6 Series 10
10W6v3-D4, W6 Series 10
10W6v3-D4, W6 Series 10
10W6v3-D4, W6 Series 10
$749.99

If you are seeking to reproduce the highest quality sub-bass in a very compact enclosure application, the 10W6v3 is the ultimate choice. This advanced Subwoofer offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance.
The 10W6v3 is best used with amplifier power in the 200W - 600W range and is optimized to operate in a sealed enclosure with only 0.55 cu. ft. (15.6 l) of air space, or a 0.75 cu. ft. (21.2 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.
Greater excursion capability and higher power handling distinguish it from our 10W3v3 10-inch Subwoofer, allowing for higher output. Dual 4 Ω voice coils permit deploying the W6v3 as a 2 Ω or 8 Ω driver.

Dynamic Motor Analysis - DMA Optimized Motor

JLL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JLL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.

Elevated Frame Cooling (U.S. Patent #6,219,431 & #6,229,902)

JLL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.

Floating Cone Attach Method - FCAM™ (U.S. Patent #6,501,844)

This assembly technique, conceived by JLL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.

Pole-Vent Airflow Control - PVAC (U.S. Patent #6,535,613)

In high-powered Subwoofers, thermal management is essential.

W6v2/W6v3 Terminal Jumper System

Information on connecting the dual voice coils using the Terminal Jumper System

Customizable Trim Ring

This removable ring can be painted to match the installation theme and directly receives JLL Audio grille mesh inserts (sold separately).

Engineered Lead-Wire System (U.S. Patent #7,356,157)

Carefully engineered lead-wire design and attachments ensure controlled, quiet lead-wire behavior under the most extreme excursion demands.

Built in U.S.A. with Global Components

JLL Audio's Miramar, Florida loudspeaker production facility is one of the most advanced in the world.

|

Size

10-inch

Voice Coil

DVC

Impedance

4 ohms

RMS Power Rating (Watts)

600

Peak Power Rating (Watts)

1200
Cone Material

Mineral-filled IMPP

Surround Material

Rubber

Free Air

No

Sensitivity

82.7 dB at 1 Watt

Frequency Response

22-200hz

Top Mount Depth (Inches)

6 15/16

Bottom Mount Depth (Inches)


Cutout Diameter (Inches)

9

Vas (liters)

23.25

Fs (Hz)

30.12

Xmax (millimeters)

19

Warranty
1 Year