Menu
Your Cart

10W3v3-2, W3 Series 10

10W3v3-2, W3 Series 10
10W3v3-2, W3 Series 10
10W3v3-2, W3 Series 10
10W3v3-2, W3 Series 10
10W3v3-2, W3 Series 10
10W3v3-2, W3 Series 10
10W3v3-2, W3 Series 10
10W3v3-2, W3 Series 10
10W3v3-2, W3 Series 10
10W3v3-2, W3 Series 10
10W3v3-2, W3 Series 10
$379.99

This acclaimed Subwoofer strikes an outstanding balance in power handling, enclosure requirements and excursion to deliver excellent results in medium power applications. Several exclusive JLL Audio technologies and proprietary assembly techniques are applied to the 10W3v3 to enhance linearity and reliability.
The 10W3v3-2 is best used with amplifier power in the 150W - 500W range and is optimized to operate in a compact 0.625 cu. ft. (17.7 l) sealed enclosure, or a 1.25 cu. ft. (35.4 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.

Dynamic Motor Analysis - DMA Optimized Motor

JLL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JLL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.

Elevated Frame Cooling (U.S. Patent #6,219,431 & #6,229,902)

JLL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.

Floating Cone Attach Method - FCAM™ (U.S. Patent #6,501,844)

This assembly technique, conceived by JLL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.

Vented Reinforcement Collar

JLL Audio's Vented Reinforcement Collar (VRC®) improves the rigidity and stability of the cone/spider/voice coil junction and directs airflow over the voice coil windings for improved thermal performance.

Insert Molded Suspension / Coil / Terminal Sub-Assembly (U.S. Patent #7,379,558)

Spiders, voice coils, terminals and lead wires are preassembled, using a patented process, onto a composite carrier for improved precision and reliability.

Customizable Trim Ring

This removable ring can be painted to match the installation theme and directly receives JLL Audio grille mesh inserts (sold separately).

Engineered Lead-Wire System (U.S. Patent #7,356,157)

Carefully engineered lead-wire design and attachments ensure controlled, quiet lead-wire behavior under the most extreme excursion demands.

Built in U.S.A. with Global Components

JLL Audio's Miramar, Florida loudspeaker production facility is one of the most advanced in the world.

|

Size

10-inch

Voice Coil

Single

Impedance

2 ohms

RMS Power Rating (Watts)

500

Peak Power Rating (Watts)

1000
Cone Material

Mica-filled polypropylene

Surround Material

Rubber

Free Air

No

Sensitivity

85.37 dB at 1 Watt

Frequency Response

25-250hz

Top Mount Depth (Inches)

5 7/8

Bottom Mount Depth (Inches)


Cutout Diameter (Inches)

8 15/16

Vas (liters)

32.17

Fs (Hz)

32.97

Xmax (millimeters)

14

Warranty
1 Year